Kyle Gordon

mqtt-zabbix. A simple MQTT to Zabbix relay, for monitoring and alerting on MQTT topics and payloads

mqtt-republisher. A simple Python republisher to help organize topics

mqtt-gpio-trigger. A python app to monitor a variety of GPIO pins and publish MQTT messages when the state changes

home-assistant-config. Python

mqtt-pwm-lights. MQTT control of PWM capable pins on the Raspberry Pi - not strictly limited to lighting either...

pypollen. Python pollen count module

rmonitor. Python

mqtt-aprs. MQTT to APRS gateway

arscons. Arduino

mqtt-owfs-temp. A Python app to monitor one-wire servers, and publish the temperature data from their sensors

homie-sonoff-touch. C++

bulb_energy. Home Assistant custom component for Bulb Energy

adsb-stack. Shell

meshtastic-map. A live map of meshtastic nodes

mqtt-rfm12b. A Python app to monitor a RFM12b (or RF12) receiver and publish results from it

domoticz-pwm-lights. Little python deamon to fiddle the Raspberry Pi PWM GPIO output on demand from Domoticz MQTT JSON messages

mqtt-weatherstation. Fine Offset WH1080 to MQTT daemon. Requires one Jeenode or 868MHz RFM12B Arduino, and a USB connection

DrivewayLights. Jeenode Sketch to sequentially dim/raise PWM controlled lights

WeatherStation. The stuff behind http://lodge.glasgownet.com/tech/remote-bifferboard-powered-weather-station/

mqtt_esp8266_ds1820_arduino. A simple Sketch to read the Temperature from multiple DS18B20 and publish them to a MQTT-Server. Compiles in the Arduino IDE for the ESP8266

spacewalk-vagrant. Red Hat SpaceWalk Vagrant config

Fritzing-Parts. Some Fritzing parts that I've created or modified

mqtt-readmeter. MQTT Publisher for the electrical meter pulsecounter at http://lodge.glasgownet.com/2007/01/09/electricity-meter/

nap_connect. A quick Python script to connect to a Bluetooth Network Access Point. Made for BlueZ 4, which *does not* use pand, pppd, etc.

openauto. AndroidAuto headunit emulator

git-achievements. Aquire achievements while using git.

cardisplay. Python

JeePower2. A small sketch to monitor the power systems in a car, and take appropriate action to control a Raspberry Pi over I2C

mqtt-usb-relay. Little daemon to control USB relays via MQTT messages

JeePower. Superceded by JeePower2 (a rewrite)

PictureFrame. Shell

DomoticzMQTT. MQTT support for Domoticz open source Domotica server

macvlans. Shell

psiamp.

blitzortung. Linux driver for TOA tracker

server-stack. Viewpoint Home Automation stack