arkypita

LaserGRBL. Laser optimized GUI for GRBL

ESP8266-SerialWebSocket. WebSocket to Serial bridge for LaserGRBL

ESP8266-SerialTelnet. Telnet to Serial bridge for LaserGRBL

Vigotech-VG-L7X. VG-L7X Vigotech engraver (WiFi model) resources and hack

GRBL-Plotter. A GCode sender for up to two GRBL controller. SVG, DXF import. 4th axis support.

autotrace. bitmap to vector graphics converter

McProtocol. This is a protocol for communicating with Mitsubishi PLCs. This is very similar to a Modbust protocol only it is a bit more proprietery. This protocol can be used without addition hardware on some PLCs.

PortSniffer. ENLYZE PortSniffer - Monitor the traffic of arbitrary serial or parallel ports

autotrace-1. unofficial AutoTrace mirror

my-copy-of-grbl-0.9-and-older-. An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Arduino

Drawbot_image_to_gcode_v2. Creates gcode for use on drawbots

SerialPortStream. SerialPortStream is an independent implementation of System.IO.Ports.SerialPort and SerialStream for better reliability and maintainability. Default branch is 2.x and now has support for Mono with help of a C library.

jigsaw. Jigsaw puzzle generator

grbl. My fork of gnea/grbl

WiFiTelnetToSerialWPS. WPS example with application WiFiTelnetToSerial

Telnet-Client. An open source telnet client written in C#

USB_Host_Shield_2.0. Revision 2.0 of USB Host Library for Arduino.

Sketch-Generation-with-Drawing-Process-Guided-by-Vector-Flow-and-Grayscale. This is the official implementation of the AAAI 2021 accepted paper "Sketch Generation with Drawing Process Guided by Vector Flow and Grayscale"