Dlloydev

QuickPID. A fast PID controller with multiple options. Various Integral anti-windup, Proportional, Derivative and timer control modes.

sTune. Open loop PID autotuner using a novel s-curve inflection point test method. Tuning parameters are determined in about ½Tau on a first-order system with time delay. Full 5Tau testing and multiple serial output options are provided.

ESP32-ESP32S2-AnalogWrite. ESP32 PWM, Servo, Easing and Tone. Smart GPIO pin management and advanced control features.

jtag2updi. HV UPDI / UPDI programmer software for Arduino (targets Tiny AVR-0/1/2, Mega AVR-0 and AVR-DA/DB MCUs)

Toggle. Arduino button debounce library for various switch types, port expanders and other 8-bit data sources. Fast and robust debounce algorithm.

Updi-Key. This DIY open source hardware connects inline with any UPDI programmer to provide a HV UPDI programming solution for tinyAVR® 0/1/2 series MCUs. Compatible with UPDI programmers that operate with jtag2updi, avrdude, pyupdi, MPLAB X IDE, MPLAB X IPE, PlatformIO and Arduino IDE using any target voltage from 3 to 5V.

Wokwi-Chip-Scope. This 4 channel scope chip allows you to monitor four analog or digital signals as they vary over time.

Wokwi-Chip-Plotter. Debug Analog or Digital Signals

Wokwi-Chip-Plot3. Plot Analog Signals

Wokwi-Chip-Mux-8-to-1-Analog. This chip connects 1 of 8 analog inputs to a single output. When Select = 0 (default), the output is 0. An LED PWM output is available for diagnostic use.

Wokwi-Chip-Bounce. Bounce Signal Generator

Wokwi-Chip-Analog-Bargraph. Converts an Analog Signal to 10-bit Bargraph or Binary

Wokwi-Chip-PWM. PWM Signal Generator